Home Cinema Installations and Sound Transmission Through Doors

The reference level found in a soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not tough listen to, in a correctly designed home cinema room.

A problem occurs though, when we face the challenge of keeping typical inside the cinema room. In Home Cinema Installation St Albans installation, quite often we find bedrooms and other living areas to be right next to your home cinema residence. Special room construction techniques allow us develop a sufficient noise barrier, in order to reduce any sound transmission towards adjacent rooms.

However, doors generally been the weakest point, in this attempt. The mass, damping and stiffness of the home cinema door determines its resistance towards the passage of any sound waves. A door’s ability to reduce noise is written by its Sound transmission Class. This means, the higher inside the Class the better the efficiency.

One more problem arises though; Sound waves can cross any opening with very little impairment. And to top it off, a tiny hole in a barrier would transmit nearly as much sound as being a much larger leak. This acoustic property of sound could be an oversized problem in your property cinema installation, where high quality construction is required. That’s the where acoustical gaskets come into appreciate. A home cinema door, so that you can be effective, the seals around the head, jamb and sill must be complete and air-tight.

In other words, the quality of the acoustical gasket in a place cinema installation, would figure out how close real sound performance of the door, will come to the published order. A hi-end home cinema design should take all the info into consideration, to ensure a hi-end acoustical end result.